iTC-5 Instrument Transducer Converter

$264.99
OR
SKU
itc-5-instrument-transducer-converter
  • DESCRIPTION
  • SPECS
  • IN THE BOX
  • REVIEWS
  •  

    iTC-5 Instrument Transducer Converter Features

    The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkng

    Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.

    Extended STng systems can support multiple iTC-5 units.

    SeaTalkng connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkng backbone.

    Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).

    If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers

     Transducer Connections on the iTC-5 | Raymarine 
     TRANSDUCER CONNECTIONS
    ItemDescription
    1Red - Speed and sea temperature transducer connection
    2Orange - Wind transducer and rotavecta connection
    3Yellow - Fluxgate Compass connection No longer supported
    4Green - Rudder reference transducer connection
    5Blue - Depth transducer connection
    6SeaTalkng backbone connection
    7SeaTalkng spur connection
    8Sea Talkng backbone connection


    Possible systems

    Note: In a SPX autopilot system the fluxgate compass and rudder reference transducer must be connected directly to the course computer and not the iTC-5.

     iTC-5 Basic STng system | Raymarine 
     BASIC SEATALKNG SYSTEM WITH iTC-5
    Part NumberDescription
    1ST70 Instrument display
    22 x i70 Instrument displays
    3Terminated SeaTalkng T-piece connector
    4Terminated iTC-5
    5Rudder reference transducer
    6Depth transducer
    7Fluxgate Compass No longer supported
    8Raymarine wind transducer or Rotavecta
    9Speed and sea temperature transducer


     iTC-5 Extended SeaTalk System | Raymarine 
     EXTENDED SEATALKNG SYSTEM WITH iTC-5
    Part NumberDescription
    1ST70 Instrument display
    2p70r Pilot Controller
    3i70 Instrument display
    4AIS tranceiver
    5SPX course computer (supplying 12 V power to SeaTalkng network)
    6Man Over Board (MOB)
    7SeaTalkng 5-way connector
    8Rudder reference transducer (connected via SPX)
    9Fluxgate Compass (connected via SPX) no longer supported
    10Multifunction display with built in GPS
    11SeaTalk to SeaTalkng converter
    12iTC-5
    13Terminated iTC-5
    14Trim tabs
    15Engine data (connected via devicenet adaptor)
    16Terminated SeaTalkng 5-way connector
    17Depth transducer
    18Speed and sea temperature transducer
    19Raymarine wind transducer or rotavecta